The LR-01 offers an easy way to extend the distance between 78 kbit/s LonWorks TP/FT-networks using a fibre optic link. The LR-01 is completely transparent to the protocol therefore installation is simple as no new network addresses are needed.
The LR-01 is equipped with either one (LR-01PP) or two pairs of fibre optic receivers and transmitters. This allows the user to build either point to point-, bus- or redundant ring topology fibre links. In a fibre ring, one of the LR-01 units will be ringmaster and will have the responsibility to stop messages from looping around the ring. The LR-01 has a built-in redundancy system that provides for fault tolerance in the fibre rings.
|
 |
 |
LonWorks®, TP/FT-10, 78 kbit/s |
|
|
Distances up to 25 km |
|
|
Multi-/single mode fibre |
|
|
ST-connectors |
|
|
SC-connectors (820 nm) |
|
|
Point to point (LR-01PP) |
|
|
Bus or redundant ring |
|
|
Transparent repeater function |
|
|
Optical signal regenerated |
|
|
Alarm output indicating failure |
|
|
AC-/DC-supply |
|
|
Easy to install |
|
|
35 mm DIN-rail housing |
|
|
|
|
|
|
|
|
