12-36 V DC
36-55 V DC
115 V AC
230 V AC
 

Table Top

Newer Westermo products are equipped with a primary switched power supply which gives possibilities to handle both AC and DC power supply with the same unit. Products supporting the primary switched power supply are introduced in two versions, LV (low voltage) and HV (high voltage). The LV and HV equipment supports the following voltage ranges.

HV: 95-240 V AC 110-240 V DC +10%

LV: 12-45 V AC 12-55 V DC +10%

For different power requirements
please contact Westermo.

Operating range
Temperature: 5-50°C, 41 to 122°F
Humidity: 0-95% RH, non-condensing

Rack

DIN-rail

 

2- or 4-wire twisted pair
For 2- or 4-wire applications in industrial environments we recommend the use of cables with at least a 0,2 mm2 cross-section and with a capacitance of between 40-80 pF/m. Use shielded cable in exposed industrial environments and unshielded cable in less exposed areas and office environments.
A shielded cable often results in a higher capacitance and, thereby, a lower maximum transmission speed.

Mini

Fibre optic cable
For indoor installations with fibre optic cables use flame-proofed type with a cord free from halogen. For outdoor installations use fibre cables which are water and UV-resistant.