The EDW-100 is an is an Industrial Ethernet to serial adapter
or Ethernet Terminal Server, designed for industrial use in harsh
environments. The unit use standard TCP/IP protocols together
with serial equipment, it allows almost any serial devices to
interface through a new or existing Ethernet network. Two EDW-100
units can be used to create a simple point to point link or multiple
units can be linked to form a one to many application all using
Ethernet as the medium to transport the data. A point to point
application can be configured with both UDP and TCP, if TCP is
used the unit can act both as a client or as a server. Configuration
of the unit is simple using theWeb-tool or via Telnet. It is
also possible to configure speed and duplex via DIP-switch, this
setting can be override by the Web-tool. |
 |
 |
Serial communication,
RS-232 or RS-422/485 |
| |
Termination of RS-422/485
and fail safe functionality |
| |
Ethernet 10/100 BaseT |
| |
Packing algorithm |
| |
Diagnostic information
via Telnet and 10 LEDs |
| |
Galvanic isolation
and enhanced surge/transient protection on all
ports |
| |
Industrial and Railway
approval |
| |
Auto MDI/MDI-X |
| |
Two levels of password
for configuration |
| |
Redundant power and
wide DC input range |
|
 |
|
|
|
|
|
