The Lynx 1xx/11xx family of fast/gigabit limited management
industrial Ethernet switches are designed to satisfy the
toughest industrial environmental requirements. Lynx 1xx
switches are 10/100BaseT while the Lynx 11xx switches are
10/100/1000BaseT. All Westermo products, including the Lynx
family of switches, are ideally suited to applications where
wide temperature, vibration, power, and EMC specifications
are a prerequisite.
The Lynx 1xx/11xx family offers basic read-only SNMP (Simple
Network Management Protocol) and port mirroring. The switches
incorporate four priority queues to ensure that network data
is deterministic. The real time properties of Ethernet have
been maintained in the Lynx unit by incorporating both layer
2 and layer 3 priority support and HoL (Head of Line) blocking
prevention.
With flexible copper and fiber optic ports, the Lynx family
of switches can be configured for maximum flexibility with
the included Windows based tool. With galvanic isolation,
transient protection, LED diagnostic information, a temperature
range of -40OF to +185OF, 19-60 VDC dual redundant power
requirements and single action DIN rail mounting, these Lynx
switches simplify industrial installations.
|
 |
 |
Limited
management – QoS and IPToS |
| |
1xx
Series fast (10/100BaseT) and 11xx
Series gigabit (10/100/1000BaseT) |
| |
Specific
usage models |
| |
- Lynx 10x/110x – Standard industrial
applications
|
| |
- Lynx 11x/111x – Marine applications
|
| |
- Lynx 12x/112x – Rail applications
|
| |
- Lynx 13x/113x – Substation/Utility
applications
|
| |
- Lynx 14x/114x – Military (M12
connector) applications
|
| |
Automatic
MDI/MDI-X crossover |
| |
Supports
LC fiber (multimode or singlemode) |
| |
Redundant
DC power supply connection (19 to 60
VDC) |
| |
Temperature
range of -40OF to +185OF
(-40OC to +85OC) |
| |
Port
monitoring diagnostics and alarms |
| |
Galvanic
isolation and enhanced surge protection |
| |
35
mm full metal IP-40 DIN-rail housing |
|
|
|
|
|
|
|
